Our Reverse series boards are excellent all mountain boards.  These boards are twin tip shapes with twin flex patterns.  Our reverse camber design has a small amount of camber between the feet and then angles up at flat angles from the foot area.  There is about 6mm of rise on the nose and tail, which makes for a subtle amount of reverse camber.


Reverse camber boards are incredible to ride in deep snow.  They float easily and the rider can ride a centered stance and still float really well in powder.  The reverse camber also makes the boards really loose feeling on the snow.  That makes them really forgiving for butter tricks and slashing around the mountain.  Our reverse camber design is subtle meaning that the rise of the nose and tail off of the snow is not too high.  This allows them to carve and hold an edge on hard snow even though they are reverse camber.

The art on the Reverse boards was done by longtime Unity employee Taylor Rounds.

technology featured in the

Board Specifics

Size 146 152 154 mid-wide 155 158 mid-wide 159 160 wide 164 165 wide
Effective Edge 112.1 113 120 120 121 124 124 127.5 126.5
Waist Width 24.2 24.3 25.4 24.5 25.6 25 26 25.4 26.3
Sidecut Radius 735 766 857 793 950 813 813 839 839
Stance Options 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches 20 to 25 inches
Core Material Full-Length Vertically Laminated Wood Core
Sidewall Material Bulletproof Sintered P-Tex Sidewall
Base Material Trizac Finished Durasurf 2001 Sintered Base
  all measurements in centimeters unless otherwise noted